KSD302 Snap Action Thermostat For Heating Machine And Ventilation
KSD302 series temperature controller, is to bring the double shell
fully enclosed metal contact temperature type temperature relay,
according to heat bilges cold shrink principle make sheet metal
bending, to set off the temperature, temperature drop can be
manually reset after, on electric up security role.
Rapid heat transmission.
No breakdown, no flashover.
Every product will be tested, extremely high temperature pass rate.
Being used the bimetal disc as temperature response element. It
will be deformed when the bimetal disc reach a definite
temperature. The snap action of bimetal disc can separate the
contactor quickly and cut off the power to protect the appliances
or electrical equipments.
1 electrical parameters: 25/250V (resistance loaded),
2 temperature range: 45 ~ 150C(can be made by customer'
3 service life: 25/250V 10000 cycle,
4 contact resistance than 50m Ω;
Automatic reset and manual reset for your choice
Boiler Hot-water Heater, Vacuum cleaner, Duplicator, Electric
Stove, Oven, Dryers, Refrigerator, Dish washer, Air-conditioning,
and other home application etc
|Model||Voltage/Current||Open temperature||Contact style|
NC or NO
NC:normally closed,contact open when temperature rises to set point
NO:normally open,contact closed when temperature rises to set point